Teknowall W50n is an addendum to W50 which allows the design of strip façades/fixtures.
Aesthetic continuity and blending between fixed and moving components allow for the architecturally elegant and technically advanced use of strips, with solutions that can range from visible aluminium frames to visible glass with hidden frames. The flexibility in manufacturing both single and multiple-component fixed/moving frames make this product extremely versatile, with different solutions to suit any immediate need and guaranteeing ease of transport and simplicity of assembly.
The profiles are extruded products in EN AW 6060 UNI-EN 573-3 primary aluminium forgeable alloy, which is heat-treated in compliance with the UNI EN 755-2 regulations (hardening and tempering with compressed air, followed by accelerated ageing), in order to obtain a T5 physical state.

Technical specifications : Strips Only glass visible from the outside, with a 13 mm rabbet. Visible from behind, with sizes which vary according to the structure Frames with and without thermal insulation Openable frames with offsetted opening Hot vulcanized rubber seals insulation system Only one metal punching machine needed for the whole system Documentation : Technical Data Sheet

With Teknowall W50sg, no aluminium is visible externally, only glass. The internal glass is held mechanically in place by the frame’s aluminium profile, while the two panes of glass are reciprocally sealed by using structural silicone. The rabbet formed between panes, both horizontally and vertically, measures 13 mm Fixed and movable infills both use the same perimeter frames onto which glass panes and panels are mounted. A hot vulcanized rubber sealing frame, hooked to posts and transoms, offers both weather-proofing and thermal insulation. Infills are locked onto posts and transoms by matching systems operated by bars which slide on purpose-made rails in the internal frames. The same profiles are used for both fixed and movable frames, with an offsetted or scissor opening.
The profiles are extruded products in EN AW 6060 UNI-EN 573-3 primary aluminium forgeable alloy, which is heat-treated in compliance with the UNI EN 755-2 regulations (hardening and tempering with compressed air, followed by accelerated ageing), in order to obtain a T5 physical state.

Technical specifications : Post/transom system Posts with different moments of inertia but same size Glass only visible from the outside 13 mm distance between the panes Internal view, 50 mm both horizontally and vertically Overall different moments of inertia but same size Identical profiles, accessories and seals to the W50 model Offsetted and scissor opening Documentation : Technical Data Sheet

Teknowall W50p is suitable for use with pyramidal solutions. Special inclined profiles for roof ridges. Preset corner profiles can be clipped onto them following the inclination required. They are suitable for pyramids with a square or octagonal base. The other profiles are identical to those of the basic W50 solution. The special outline of the seals allows for slopes ranging from 0° to 105°. Roof ridge templates can measure 100 or 132 mm, according to the inclination desired: Sapa supplies special accessories for optimal finishing at the top of the pyramid. Thermal insulation is provided by means of the same bars used for the W50 façade. Special thermally insulated profiles allow for the offsetted opening of the skylights.
The profiles are extruded products in EN AW 6060 UNI-EN 573-3 primary aluminium forgeable alloy, which is heat-treated in compliance with the UNI EN 755-2 regulations (hardening and tempering with compressed air, followed by accelerated ageing), in order to obtain a T5 physical state.

Technical specifications : in addition to the technical specifications of the W50 system 3 mm thick corner posts Mostly the same profiles as the base model Same accessories as the base model Same seals as the base model. Same thermal insulation as the base model. Special Sapa accessories for the top of the pyramid Profiles on corners are inserted and not rolled. Water-proofing bitumen adhesive tape Documentation : Technical Data Sheet

Teknowall W50mp and Wmp are systems for cladding ventilated façades. These systems provide a metallic understructure and are complete with accessories for bracket connection to the wall and for hooking aluminium or composite panels.
W50mp is characterized by the remarkable strength of its post and transom profiles, which enable the use of a smaller amount of anchoring brackets, even in the case of very large panels.
On the other hand, Wmp is characterized by the lightness of its posts, which makes it ideal for use with smaller panels.
The profiles are extruded products in EN AW 6060 UNI-EN 573-3 primary aluminium forgeable alloy, which is heat-treated in compliance with the UNI EN 755-2 regulations (hardening and tempering with compressed air, followed by accelerated ageing), in order to obtain a T5 physical state.

Technical specifications : in addition to the technical specifications of the W50 system Solutions for façade cladding and ventilated façades Different solutions for mainly horizontal or vertical architectural structures Tubular section posts, which increases profile inertia, thus reducing overall depth, number of anchoring brackets and ultimately cost, as well. Adjustable accessories which allow : machining-free fitting of the understructure ease of use and precision to the millimetre during fitting shorter laying times Documentation : Technical Data Sheet

Teknowall W80pu is the solution for the “point-supported suspended” façade. It is characterized by high transparency and wider spaces. A clip-on profile allows the rails to be hidden, within which the glazing support “spider” accessories slide and hook, both inside and outside the post. Stainless steel “ball-and-socket” joints, which have different physical characteristics according to the type of glass and the desired aesthetic effect, fix the glass panes onto the spiders; they are also articulated in such a way as to allow different degrees of inclination for slanted, concave and convex solutions. Weather-proofing in the joints located between the glass panes is guaranteed by the application of UV-resistant silicone sealant.
The profiles are extruded products in EN AW 6060 UNI-EN 573-3 primary aluminium forgeable alloy, which is heat-treated in compliance with the UNI EN 755-2 regulations (hardening and tempering with compressed air, followed by accelerated ageing), in order to obtain a T5 physical state.

Technical specifications : Point-supported curtain wall Tubular-section posts, elliptical on the outside 80 mm width; variable depths (presently 250 mm) Aluminium tubes allow the posts to align perfectly, also providing static continuity Aluminium tubes fitted at the extremities of the posts ensure the locking and the expansion of the posts Aluminium brackets, also inserted in the hollows of the posts, allow the anchoring of the posts to the bearing structures Glass modules are hooked to the aluminium frame by means of locking plates, spiders and ball-and-socket joints Distance between holes on the glass modules: 220 mm Spiders are available in one, two, three or four arms Ball-and-socket joints are available in different aesthetic models (raised or flush in relation to the glass) Spiders, clamping screws and ball-and-socket joints are in stainless steel The rabbet between panes measures 10 mm Purpose-made silicone seals allow sealing between glass panes Documentation : Technical Data Sheet Certification